Contact Us 1-800-596-4880
  1. Homepage
  2. Mule Runtime (3.6)

  3. Auto-Paging in Anypoint Connectors (3.6)

Auto-Paging in Anypoint Connectors

Mule Runtime Engine versions 3.5, 3.6, and 3.7 reached End of Life on or before January 25, 2020. For more information, contact your Customer Success Manager to determine how you can migrate to the latest Mule version.

When an Anypoint Connector in your flow produces output that is significantly large, processing it may cause significant performance delays in your application. To prevent this from happening, you can split the connector’s output into several "pages" for more efficient processing. Within Mule this behavior in an Anypoint Connector is referred to as "auto-paging" because the connector automatically paginates its output to prevent memory issues. However, if memory use is not an issue, you can forgo any auto-paging configuration and simply treat the entire payload as a single unit.

Configuring Auto-Paging

The table below lists the Anypoint Connectors which support auto-paging functionality. (Additionally, you can use auto-paging with any custom-built connector which supports auto-paging functionality.)

Connectors with Auto-Paging Bundled with Studio

Box

Google Calendars

Google Drive

Google Contacts

Google Prediction

Google Spreadsheets

Google Tasks

Microsoft Dynamics CRM (on Demand)

Microsoft Dynamics CRM (on Premise)

NetSuite

QuickBooks

Salesforce

✔

Studio Visual Editor

  1. To make the Paging section visible, you must first select an Operation which outputs a collection, for example Get groups. Otherwise, Studio does not display the Paging section in the properties editor.

  2. Enter an integer in the Fetch Size field to indicate the batch size of objects in a "page". For example, set the Fetch Size to 50 to return information in batches of 50 objects.

    googlecontacts1
    Attribute Default Value Description

    Fetch Size

    100

    Specify the number of objects that Mule returns in each page.

XML Editor

  1. To the connector in your flow, add a fetchSize attribute.

  2. Set the value of the attribute to an integer to indicate the batch size of objects in a "page". For example, set fetchSize to 50 to return information in batches of 50 objects.

    <flow name="Flow1">
    <google-contacts:get-groups config-ref="google" doc:name="paging" fetchSize="50"/>
</flow>
    Property Default Value Description

    fetchSize

    100

    Specify the number of objects that Mule returns in each page.

Handling Auto-Paged Output

When you use a connector that employs paging, Mule creates an iterator object that splits the payload into manageable pages. Regardless of the page-size, the iterator pushes out objects one at a time, then fetches the next pages on demand. To process the paginated output, you must use elements in your flow that can handle collections, such as a Foreach scope, a collection splitter, a DataMapper transformer, etc. Because Mule processes the set of pages one page at a time, it prevents memory usage from exceeding its limits.

Example

Studio Visual Editor

  1. Drag an HTTP endpoint onto the canvas

  2. Set its Path to authenticate.
    Create a Connector Configuration element, set its host to localhost and its port to 8081

  3. Add a Google Contacts connector to the flow, then set its Operation to Authorize.

  4. Create a Google Contacts Global Element, then configure its Consumer Key and Consumer secret.

  5. Create a new flow with a new HTTP endpoint.

  6. Set its Path to get_contacts.

  7. Add a new Google Contacts connector in the new flow.

  8. Set its Operation to Get Contacts and its Fetch Size to 50.

    googlecontacts2

  9. Add a Foreach scope after the Google Contacts connector.

Add a Logger inside the Foreach scope.

+ image::autopaging-flow.png[autopaging+flow]

When a message reaches the Google Contacts connector, the Logger outputs a separate message for each object. If there are more than 50 objects, Mule paginates the output.

XML Editor

  1. Create a google-contacts Global Element, then define its Consumer Key and Consumer secret.

    <google-contacts:config-with-oauth name="Google_Contacts" consumerKey="" consumerSecret="" doc:name="Google Contacts" applicationName="Mule-GoogleContactsConnector">
    <google-contacts:oauth-callback-config domain="localhost" path="auth" remotePort="8081"/>
</google-contacts:config-with-oauth>

  2. Create an HTTP connector and set the value of its Path to authenticate.

    <http:listener config-ref="listener-config" path="authenticate" doc:name="HTTP Connector"/>

  3. Outside the flow, create a configuration element that matches the name referenced by the connector. Set the host to localhost and the port to 8081.

    <http:listener-config name="listener-config" host="localhost" port="8081"/>

  4. Add a Google Contacts connector setting its operation to authorize.

    <google-contacts:authorize config-ref="Google_Contacts" doc:name="Google Contacts"/>

  5. Create a new flow with a new HTTP endpoint. Set the value of its Path to get_contacts, and reference the same configuration element as the other connector.

    <http:listener config-ref="listener-config" path="get_contacts" doc:name="HTTP Connector"/>

  6. Add a new Google Contacts connector in the new flow setting its operation to get-contacts and fetchSize to 50.

    <google-contacts:get-contacts config-ref="Google_Contacts" doc:name="Google Contacts" fetchSize="50"/>

  7. After the Google Contacts connector, add a Foreach to the flow, then add a Logger as a child element inside Foreach element.

    <foreach doc:name="For Each">
    <logger message="#[message.payload.getEmailAddresses()]" level="INFO" doc:name="Logger"/>
</foreach>

When a message reaches the Google Contacts connector, the Logger outputs a separate message for each object. If there are more than 50 objects, Mule paginates the output. See below for a Complete Example.

Additional MEL Expressions

When working with paginated output in a flow, you can use MEL expressions to call two functions.

Function Syntax Description

size

#[payload.size()]

Returns the total amount of available objects.

close

#[payload.close()]

Abort iteration.
This function frees up the resources that auto-paging is using.

Complete Example

You can call both the size() and the close() functions in any expression that supports MEL. The simple example below illustrates how to call size() in a logger so that it records the total amount of objects that the connector is outputting.

<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns:http="http://www.mulesoft.org/schema/mule/http" xmlns:tracking="http://www.mulesoft.org/schema/mule/ee/tracking" xmlns:google-contacts="http://www.mulesoft.org/schema/mule/google-contacts" xmlns="http://www.mulesoft.org/schema/mule/core" xmlns:doc="http://www.mulesoft.org/schema/mule/documentation" xmlns:spring="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-current.xsd
http://www.mulesoft.org/schema/mule/core http://www.mulesoft.org/schema/mule/core/current/mule.xsd
http://www.mulesoft.org/schema/mule/google-contacts http://www.mulesoft.org/schema/mule/google-contacts/1.7.4/mule-google-contacts.xsd
http://www.mulesoft.org/schema/mule/http http://www.mulesoft.org/schema/mule/http/current/mule-http.xsd
http://www.mulesoft.org/schema/mule/ee/tracking http://www.mulesoft.org/schema/mule/ee/tracking/current/mule-tracking-ee.xsd">


    <google-contacts:config-with-oauth name="Google_Contacts" consumerKey="" consumerSecret="" doc:name="Google Contacts" applicationName="Mule-GoogleContactsConnector">
        <google-contacts:oauth-callback-config domain="localhost" path="auth" remotePort="8081"/>
    </google-contacts:config-with-oauth>
    <http:listener-config name="listener-config" host="localhost" port="8081" doc:name="HTTP Listener Configuration"/>
    <flow name="authorizationAndAuthenticationFlow">
        <http:listener config-ref="listener-config" path="authenticate" doc:name="HTTP Connector"/>
        <google-contacts:authorize config-ref="Google_Contacts" doc:name="Google Contacts"/>
    </flow>
    <flow name="googleContactsTest" >
        <http:listener config-ref="listener-config" path="get_contacts" doc:name="HTTP Connector"/>
        <google-contacts:get-contacts config-ref="Google_Contacts" doc:name="Google Contacts" fetchSize="50"/>
        <logger message="#[payload.size()]" level="INFO" doc:name="Log_Size"/>
        <foreach doc:name="For Each">
             <logger message="#[payload.getEmailAddresses()]" level="INFO" doc:name="Log_Size"/>
        </foreach>
    </flow>
</mule>

See Also